Very compact, small dimensions, robust, for static and dynamic measurement in very restricted structures, made of stainless steel
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×
Model | 8416 |
Measuring range |
0 … 20 N |
Direction of force | Compression |
Standardization | Option |
Signal output |
1 mV/V, nominal* * Deviations from the stated value are possible. |
Protection class | IP54 |
Overload protection | No |
Pull-plate | No |
Load introduction button | Yes |
Range of operating temperature | 0 ... +80 °C |
Specific characteristics |
|
Due to their extremely compact design, these load cells can be used wherever static or dynamic load forces have to be measured in very tight spaces.
Model 8416 is perfect for use in micro-technology and just as suitable for measuring tasks in the research and development sector.
The ultra-miniature compression load cell model 8416 is a flat, circular disc, the bottom of which is sealed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor.
The sensor element inside the body carries a strain gage full bridge which outputs voltage directly proportional to the measurement variable upon application of force.
The short nominal measurement distance of the ultra-miniature compression load cells due to their design provides a high degree of rigidity. If needed, the nominal characteristic value can be standardized in the sensor connection cable. This allows for quick and easy interchange or simultaneous connection of several sensors to a single evaluation unit.
Example showing load cell fitted under pre-load with extreme overload protection
Talstr. 1-5
76593 Gernsbach
Germany
Fon: +49 7224645-0
Fax: +49 7224645-88
infoburster.com
www.burster.com
The Battery Show
18.06. -
20.06.24 -
Stuttgart,
70269,
Deutschland
burster North America
Products Sales USA
burster Inc.
105 Laurel Creek Rd. SE
Suite: 10C Calhoun, GA. 30701, USA
Phone: +1-706-659-7472
salesburster.us
Products Sales USA
burster Inc.
304 State Route 303
44241 Streetsboro, Ohio, USA
Phone: +1-440-214-5333
salesburster.us
Sales Process Instruments USA
Physicom Corp
Scarborough, Ontario
Ontario M1E 4Y9, Canada
Phone: 416 7543168
Fax: 416 7542351
salesphysicomcorp.com
Sales Sensors & Process Instruments CANADA
A-Tech Instruments Ltd.
Scarborough, Ontario
Ontario M1E 4R5, Canada
Phone: 416 7547008
Fax: 416 7542351
salesa-tech.ca