8512 S-Beam Tension and Compression Load Cell

Highly accurate, very flat design, simple force application, for tension and compression, many load cycles, for static and dynamic measurement

  • Features

    • Measuring ranges from 0 … 20 N to 0 … 880 N
    • Relative non-linearity: ±0.25 % F.S.
    • Many load cycles
    • Excellent price-performance ratio
    • burster TEDS optionally available
  • Product data

    Model 8512
    Measuring range

    0 … ±20 N
    0 … ±50 N
    0 … ±100 N
    0 … ±220 N
    0 … ±440 N
    0 … ±880 N

    Direction of force Tension and compression
    Signal output

    1,5 mV/V
    1,7 mV/V
    2,7 mV/V
    depending on measuring range

    Overload protection Option
    Range of operating temperature 0 ... +80 °C
    Specific characteristics

    • Measuring ranges from 0 … 20 N to 0 … 880 N
    • Non-linearity ±0.25 % F.S. *
    • Many load cycles
    • Excellent price-performance ratio
    • burster TEDS optionally available

    * The data in the area 20 % - 100 % of rated load Fnom

  • Description

    The measuring element of this load cell consists of a double bending beam with strain gauges, the resistance of which changes with the application of force. Upon applying a voltage to the strain gauge bridge, the change in the strain gauge resistance is converted into output voltage, which is directly proportional to the force. The strain gauges and the entire measuring element are protected from water spray by metal cover including sealing material.

    The tensile or compressive load to be measured is applied to the sensor element through the M6 threaded hole located on each end face. The load can be applied easily, along the sensor axis. This serves to prevent falsification of the measured values. Overload protection can be realized with little effort using a mechanical stop.

  • Data Sheet & Downloads

    Data sheet
    Brochure
    Further info



burster in Canada

Physicom Corp.
+1 4167543168
salesphysicomcorp.com
www.physicomcorp.com

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments

Company-Information Company-Information

Canada

A-Tech Instruments Ltd.

Toronto Office
Physicom Corp.
P.O. Box 252
Scarborough, ON
M1E 4R5
Canada

Fon: +1 4167547008
Fax: +1 4167542351
salesa-tech.ca
www.a-tech.ca

Montreal Office
P.O. Box 447
Pointe Claire, PQ
H9R 4N9
KANADA

Fon: +1 5146955147
Fax: +1 5146306136

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Physicom Corp.

P.O. Box 462
Scarborough, ON
M1E 4Y9
Canada

Fon: +1 4167543168
Fax: +1 4167542351
salesphysicomcorp.com
www.physicomcorp.com

Local sales support through different rep networks available, please inquire at Physicom.

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments
×

Product Inquiry

    Product comparison

      Brandnew brochure: Load cells

      Discover our new brochure Load cells for production, automation, R&D and quality assurance with many application examples and product focused information!

      Download our new brochure

      © 2020 // burster präzisionsmesstechnik gmbh & co kg
      nach