Pulling forces and transmitted forces

in bowden cables

  • Ultra-compact design
  • Long fixing thread
  • Thanks to its low intrinsic weight, the sensor does not alter the measurement result in whatever position it is fitted

task

The transmitted forces in vehicle bowden cables need to be measured in test beds. These forces vary according to length, pre-tension and radius of curvature of the installed cable. Extreme temperatures also affect the measurement. In addition, the tests must measure the long-term performance of the cables and the attenuating effects of the wires on transmission of the pulling forces. The 8417 load cell is ideal for this purpose because its negligible intrinsic weight means it has no effect on the measurement and hence does not distort the result. This is particularly important when the dynamic behaviour of fine wires needs to be assessed.

Go to product 8417

Sectors

burster in USA

burster Inc.
Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
www.burster.us

Product category :

  • Torque Sensors
  • Load Cells
  • Displacement Sensors
  • Mechanical and Electrical Calibration Solutions

Company-Information Company-Information

Physicom Corp.
+1 4167543168
salesphysicomcorp.com
www.physicomcorp.com

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments

Company-Information Company-Information

USA

burster Inc.

Adam Giorgione; Christina Giorgione
105 Laurel Creek Rd. SE
Suite: 10C Calhoun, GA. 30701

Darren McCulley
304 State Route 303
44241 Streetsboro OH

USA

Fon: Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
www.burster.us

Product category :

  • Torque Sensors
  • Load Cells
  • Displacement Sensors
  • Mechanical and Electrical Calibration Solutions

Physicom Corp.

P.O. Box 462
Scarborough, ON
M1E 4Y9
Kanada

Fon: +1 4167543168
Fax: +1 4167542351
salesphysicomcorp.com
www.physicomcorp.com

Local sales support through different rep networks available, please inquire at Physicom.

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments
×

Product Inquiry

    Product comparison

      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben