Measurement of mechanical values

at a completely automated motor vehicle test bed

  • High accuracy
  • Rapid measuring value collection
  • Configuration via PROFIBUS 

TASK

On a completely automated test bed motor vehicle seats should be checked for their encumbrance. The following features should be tested and recorded:

  • Adjusting angle of the back
  • Torque required for turning handle
  • Total weight of the seat (with and without dummy)
  • End position determination

In order to be able to make a well defined statement about the categorization of the motor vehicle seat, the measurement data must be recorded and networked and deposited together as test result on the PROFIBUS level.

SPECIFIC REQUIREMENT

All test data should be transferred at the same time for storage, in order to obtain relevant samples of information for comparative logging of this test. A tare function is a consideration for mounted sensors addressing the issue concerning initial load (dummy load).

SOLUTION

For the recording of all mechanical values following sensors are used:

  • Adjusting angle of the back → angular displacement sensor model 8820
  • Torque of the turning handle → torque sensor model 8661
  • Total weight of the seat → 2 load cells model 8526
  • End position determination → displacement sensor model 8719

All sensor signals are recorded by 4 individual Sensor Profibus Modules 9221. Concomitantly the modules display the sensors with voltage and evaluate their signals. The transferring of measurement data takes place in parallel via PROFIBUS. The tare activation concerning a possible initial load, which can be modelled as a dummy, takes place directly via simple PLC unit communication, over PROFIBUS.

Go to product 9221
Go to product 8661
Go to product 8820
Go to product 8526
Go to product 8710, 8711

Sectors

Downloads

Applications
burster in USA

burster Inc.
Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
www.burster.us

Product category :

  • Torque Sensors
  • Load Cells
  • Displacement Sensors
  • Mechanical and Electrical Calibration Solutions

Company-Information Company-Information

Physicom Corp.
+1 4167543168
salesphysicomcorp.com
www.physicomcorp.com

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments

Company-Information Company-Information

USA

burster Inc.

Adam Giorgione; Christina Giorgione
105 Laurel Creek Rd. SE
Suite: 10C Calhoun, GA. 30701

Darren McCulley
304 State Route 303
44241 Streetsboro OH

USA

Fon: Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
www.burster.us

Product category :

  • Torque Sensors
  • Load Cells
  • Displacement Sensors
  • Mechanical and Electrical Calibration Solutions

Physicom Corp.

P.O. Box 462
Scarborough, ON
M1E 4Y9
Kanada

Fon: +1 4167543168
Fax: +1 4167542351
salesphysicomcorp.com
www.physicomcorp.com

Local sales support through different rep networks available, please inquire at Physicom.

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments
×

Product Inquiry

    Product comparison

      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben