Canada
International
Mexico
USA
Flight testing
of a paraglider
- Rugged construction
- Test equipment adds little extra weight
- Maximum possible safety for the pilot
TASK
During flight testing of a paraglider, the pilot flies through a program that includes standard flight situations and situations at the limits of flying capability. The flight test includes measuring the forces that the pilot has to exert during the flight to control and handle the paraglider in a range of situations. These forces are measured at a central point and recorded during the flight.
SPECIFIC REQUIREMENT
- Sensors must be waterproof as protection against fog or rain
- Simple and safe to handle during the flight
- Time-triggered data logging
- Low weight of complete equipment
SOLUTION
A burster 8435 load cell with pull plate is fitted in the shackle between the paraglider control lines and the pilot’s handle. The pull plate ensures that the tension forces to be measured are always directed solely along the axis of the device. The portable 7281 tester is carried in the pilot’s rucksack. This unit provides sensor excitation and uses a built-in data logger to record the measured values, which are read out and analysed by the DigiCal PC software after landing.
Go to product 8435
Go to product TRANS CAL 7281
Sectors
Downloads
Applications
