Fill level measuring and level monitoring

in a completed system

  • High accuracy
  • Can be used in harsh industrial environment
  • Configuration via PROFIBUS is possible

TASK

Trust is good, control is better. Therefore the fill level control in a completed system should be realized with a 24 h level monitoring. This control is achieved when the measurement data should be transferred via PROFIBUS with a transfer speed of 1,5 MBaud to a PC and stored.

SPECIFIC REQUIREMENT

Simplest installation work as well as a precise and durably reliable measurement values recording should be realized. It must be guaranteed that even in rough environment conditions the electronics are protected from exposure to water. Additionally, extensive diagnosis functionalities and long-range online-alterations should be supported with current control.

SOLUTION

For the pressure recording a pressure difference transmitter model 8310 is used. It transfers the pressure difference signal 24 hours online to the waterproof Sensor Profibus Module 9221-IP65. The interface developed for highest precision claims records and monitors the measurement data accordingly. Afterwards the module transfers the measurement values obtained with a speed of 1,5 MBaud to the control cabinet with Profibus connection. The module supports the protocol PROFIBUS DPV1, allowing central alterations to diagnosis criterion, which can be made during operation, both possible and easy. The adjusted calibration and configuration data (zero voltage protected) is deposited in an EEPROM, avoiding the need for reprogramming module, in the event of a power surge or disconnect.

Go to product 9221
Go to product

Sectors

Downloads

Applications
burster in USA

burster Inc.
Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
www.burster.us

Product category :

  • Torque Sensors
  • Load Cells
  • Displacement Sensors
  • Mechanical and Electrical Calibration Solutions

Company-Information Company-Information

Physicom Corp.
+1 4167543168
salesphysicomcorp.com
www.physicomcorp.com

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments

Company-Information Company-Information

USA

burster Inc.

Adam Giorgione; Christina Giorgione
105 Laurel Creek Rd. SE
Suite: 10C Calhoun, GA. 30701

Darren McCulley
304 State Route 303
44241 Streetsboro OH

USA

Fon: Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
www.burster.us

Product category :

  • Torque Sensors
  • Load Cells
  • Displacement Sensors
  • Mechanical and Electrical Calibration Solutions

Physicom Corp.

P.O. Box 462
Scarborough, ON
M1E 4Y9
Kanada

Fon: +1 4167543168
Fax: +1 4167542351
salesphysicomcorp.com
www.physicomcorp.com

Local sales support through different rep networks available, please inquire at Physicom.

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments
×

Product Inquiry

    Product comparison

      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben