Canada
Mexico
USA
Electrical testing of stators
for electric motors
- Measuring range 1 μΩ ... 200 kΩ
- Accuracy ±0.03 % Rdg. ±3 counts
- PLC control
- Dual-comparator for OK/NOK evaluation of the device under test
- Temperature-compensated measurement
TASK
During stator manufacture, the stator wire is crimped into the connecting pin after winding. Crimping can cause wire breakage or the crimping process may not be performed correctly, resulting in a higher resistance. The crimping process requires 100% testing.
SPECIFIC REQUIREMENT
- Rapid OK/NOK evaluation of the stator
- Simultaneous testing of two separate windings in the stator
- High-speed testing of an inductive device
Solution
The RESISTOMAT® 2316 measures the resistance values using the contact pins pressed onto the stator connecting pins, thereby ensuring 100% testing.
The test equipment is controlled via the production plant PLC.
Info: This application can also be solved with the RESISTOMAT® 2311.
Go to product RESISTOMAT® 2316
Go to product RESISTOMAT® 2311
Sectors
Downloads
Applications
