Electrical testing of stators

for electric motors

  • Measuring range 1 μΩ ... 200 kΩ
  • Accuracy ±0.03 % Rdg. ±3 counts
  • PLC control
  • Dual-comparator for OK/NOK evaluation of the device under test
  • Temperature-compensated measurement

TASK

During stator manufacture, the stator wire is crimped into the connecting pin after winding. Crimping can cause wire breakage or the crimping process may not be performed correctly, resulting in a higher resistance. The crimping process requires 100% testing.

SPECIFIC REQUIREMENT

  • Rapid OK/NOK evaluation of the stator
  • Simultaneous testing of two separate windings in the stator
  • High-speed testing of an inductive device

Solution

The RESISTOMAT® 2316 measures the resistance values using the contact pins pressed onto the stator connecting pins, thereby ensuring 100% testing.
The test equipment is controlled via the production plant PLC.

Go to product RESISTOMAT® 2316

Sectors

Downloads

Applications
burster in USA

burster Inc.
Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
www.burster.us

Product category :

  • Torque Sensors
  • Load Cells
  • Displacement Sensors
  • Mechanical and Electrical Calibration Solutions

Company-Information Company-Information

Physicom Corp.
+1 4167543168
salesphysicomcorp.com
www.physicomcorp.com

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments

Company-Information Company-Information

USA

burster Inc.

Adam Giorgione; Christina Giorgione
105 Laurel Creek Rd. SE
Suite: 10C Calhoun, GA. 30701

Darren McCulley
304 State Route 303
44241 Streetsboro OH

USA

Fon: Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
www.burster.us

Product category :

  • Torque Sensors
  • Load Cells
  • Displacement Sensors
  • Mechanical and Electrical Calibration Solutions

Physicom Corp.

P.O. Box 462
Scarborough, ON
M1E 4Y9
Kanada

Fon: +1 4167543168
Fax: +1 4167542351
salesphysicomcorp.com
www.physicomcorp.com

Local sales support through different rep networks available, please inquire at Physicom.

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments
×

Product Inquiry

    Product comparison

      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben