Differential measurement of geometric values

in production and the laboratory

  • For strain gauges, potentiometers and standard signals
  • Limits/peak-value buffer
  • Multichannel model
  • High sampling rate
  • Measured values can be transferred via PROFIBUS, RS232 or analog output
  • Powerful software tool available for data analysis and data logging

TASK

The SENSORMASTER 9163 covers a wide range of applications in which process values need to be measured, displayed, analysed and transferred to higher-level control systems. Typical applications include measuring geometric parameters in production, for instance using differential measurements, or testing material properties in the laboratory.

SPECIFIC REQUIREMENT

  • High sampling rate
  • Using DigiVision analysis software to record the measurement data via a PC

SOLUTION

As part of the quality assurance process, the shaft is tested for true running, bow and concentricity of the bearing surfaces. The test also includes measuring the diameter of the shaft bearings. In the test, the shaft is clamped in a holder and turned by a motor while being measured by two displacement sensors. The instrument measures the difference between the signals from these two sensors; this difference is only allowed to vary within a specified tolerance band. The SENSORMASTER 9163 performs the difference calculation and assesses the results. As this process takes just a few seconds, both random sampling and 100% testing are possible. If the shaft does not lie within the tolerance band, the SENSORMASTER 9163 outputs an alarm signal.

Go to product SENSORMASTER 9163

Sectors

Downloads

Applications
burster in USA

burster Inc.
Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
www.burster.us

Product category :

  • Torque Sensors
  • Load Cells
  • Displacement Sensors
  • Mechanical and Electrical Calibration Solutions

Company-Information Company-Information

Physicom Corp.
+1 4167543168
salesphysicomcorp.com
www.physicomcorp.com

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments

Company-Information Company-Information

USA

burster Inc.

Adam Giorgione; Christina Giorgione
105 Laurel Creek Rd. SE
Suite: 10C Calhoun, GA. 30701

Darren McCulley
304 State Route 303
44241 Streetsboro OH

USA

Fon: Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
www.burster.us

Product category :

  • Torque Sensors
  • Load Cells
  • Displacement Sensors
  • Mechanical and Electrical Calibration Solutions

Physicom Corp.

P.O. Box 462
Scarborough, ON
M1E 4Y9
Kanada

Fon: +1 4167543168
Fax: +1 4167542351
salesphysicomcorp.com
www.physicomcorp.com

Local sales support through different rep networks available, please inquire at Physicom.

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments
×

Product Inquiry

    Product comparison

      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben