Canada
Mexico
USA
Automatic mechanical haptics test
on high-quality control elements
- Measuring ranges of 0 to 2.5 N and 0 to 100 kN
- Temperature compensator for range -55 °C to 200 °C
- Excellent long-term stability, designed for high load cycles
- Minor construction cost due to simple installation and insensitivity to outside forces
TASK
Inspecting the tactile behavior entails the precise measurement of the most minute operational forces, click ratio, blocking loads, et al.
SPECIFIC REQUIREMENT
- Small forces
- Insensitivity to lateral forces
- Quick reactions so it can recognize lock-in positions
SOLUTION
The precision miniature pressure sensor should be installed between a linear unit operated with an electric multiphase motor and a tappet. This ensures the exact and sensitive activation of the switch and pushbutton, whose actuating force, switch points, stop points and release points should be defined. Any lateral forces on the sensor axis which might be caused by the "soft" placement of operating elements are absorbed by the supporting diaphragms inside the sensor and kept away from the actual sensing element. This prevents them from having any influence on the sensor results.
Sectors
Downloads
Applications
