8630 Precision torque sensor

• Features

  • Measurement ranges from 0 ... 2 N·m to 0 ... 200 N·m
  • Linearity error from ≤ 0.05 % F.S.
  • Output signal ± 10 V / USB / mV/V
  • Tare function, filter and average values configurable

• Product data

  Model	8630
  Principle	Non-rotating
  Measuring range	0 … ± 2 N·m 0 … ± 5 N·m 0 … ± 10 N·m 0 … ± 20 N·m 0 … ± 50 N·m 0 … ± 100 N·m 0 … ± 200 N·m
  Signal output	0 ... ±10 V incl. configuration USB 0 ... ±10 V incl. USB configuring and measuring USB Standardized output signal (mV/V) Standardized output signal (mV/V) with TEDS
  Mechanical connection	Internal square/External square Internal square/Flange-mounted Internal square/incl. Bracket-mounted
  Electrical connection	7 pins, Micro-USB (Option)
  Protection class	IP40
  Range of operating temperature	-20 °C ... +80 °C with integrated amplifier/USB -20 °C ... +60 °C
  Specific characteristics	Standardized output signal Extremely compact design

• Description

  This high-precision torque sensor can be used to perform both static and dynamic measurements on non-rotating parts. The internal and external square drive design make this sensor especially easy to fit in existing or new screw-fitting applications.

  Quality assurance and monitoring of screw-fastening tools are just two applications that can take full advantage of sensor features such as USB port, built-in amplifier and side-load absorbing bearings.

  With no rotating parts, this sensor needs no maintenance when used correctly.

  Available accessories include mounting brackets and flange adapters, which enable quick, easy and practical integration of the sensor into existing or newly developed setups and test benches.

  The strain-gauge based sensor’s modular design allows precise configuration for the desired application.

  With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque. The sensor can be configured via the micro-USB interface, providing access to, for example, a filter frequency setting, averaging, and a tare function. Measurements via USB in addition to the voltage output are available with the USB measurement option. The sensor comes with the DigiVision software for performing measurements and data archiving, with drivers additionally available e.g. for LabVIEW. Integration into custom software is possible via DLL. Examples can be found on our website www.burster.com.

  The burster TEDS option (electronic data sheet, memory chip with sensor-specific data) allows rapid configuration of compatible evaluation units (instrumentation amplifier, indicator, ...).

• Data Sheet & Downloads

  Data sheet

  8630

  DEEN

  Brochure

  Torque sensors for production, automation, R&D and quality assurance

  DEEN

  Operation manual

  8630

  DEEN

  DigiVision Torque

  DEEN

  Software

  DigiVision

  DeEn

  DigiVision version

  DEEN

  Info about DigiVision

  DEEN

  Further info

  Overview torque sensors

  DEEN

• Accessories

  Flange adapter 8600-Z001

  DEEN
  Flange adapter 8600-Z002

  DEEN
  Flange adapter 8600-Z003

  DEEN
  Flange adapter 8600-Z005

  DEEN
  Flange adapter 8600-Z006

  DEEN
  Flange adapter 8600-Z007

  DEEN
  Connecting cable 99594

  DEEN

• Videos

  Please accept marketing-cookies to watch this video.

  Torque Sensor 8630 - Trans-Verse Load Insensitivity

  Please accept marketing-cookies to watch this video.

  Torque Sensors: Made in Germany - Made by burster

  
  

  Youtube channel

• Application Examples

  

  Non-rotating tightening-torque measurement

  on electric screwdrivers

  Detail

Related products

SENSORMASTER 9163

DIGIFORCE® 9311

DIGIFORCE® 9307

TRANS CAL 7281