9206 USB multisensor interface

"Plug & measure" design, simple connection via PC USB port, resolution up to 24 bit, high speed measurement of up to 1200 meas./second, several interfaces can be networked

Product Inquiry

    Product comparison

      • Features

        • Inexpensive "Plug & Measure" design
        • Simple connection via PC USB port
        • 24 bit resolution
        • High-speed measurement of up to 1200 readings/sec.
        • Convenient configuration and analysis software DigiVision
        • Pt100 as option
        • LabVIEW and DLL drivers free of charge
        • Integration in customer-owned software
        • 6 wire technology for the highest precision
      • Product data

        Model 9206
        Measurement error bis zu 0,01 % F.S.
        Sample rate 1200/s
        Type of sensor

        • Strain gauge
        • Potentiometric
        • DC/DC
        • Pt100
        Interfaces USB
        Indicator Status LED
        Sensor excitation

        Strain gauge:

        • 2.5 V / 5 V

        Potentiometer:

        • 5 V

        Transmitter and DC/DC sensors:

        • 12 V
        Protection class IP67
        Supply voltage 4 V … 6 V
        Specific characteristics

        • Inexpensive "Plug & Measure" design
        • Simple connection via PC USB port
        • 24 bit resolution
        • High-speed measurement of up to 1200 readings/sec.
        • Convenient configuration and analysis software DigiVision
        • Pt100 as option
        • LabVIEW and DLL drivers free of charge
        • Integration in customer-owned software
        • 6 wire technology for the highest precision
      • Description

        In the field there is a frequent need to measure sensor readings rapidly and easily right at the sensor and to transfer them directly to a PC without additional amplifiers or converters. The 9206 USB sensor interface can satisfy this requirement admirably, thanks to its „plug & measure“ design. The USB connection means installation could not be simpler.

        Typical applications:

        • Mobile test measurements via laptop
        • Laboratory test set-ups
        • Instrumentation and control
        • Diagnostic measurements in the chemical industry
        • PC-based recording of expansion figures in bio engineering

        The USB sensor interface takes its supply from the connected PC via the USB port, and uses it to generate the power supply for the sensors. The initial settings and sensor settings are made by burster in-house and saved in the USB sensor interface. These can then be fine-tuned by the customer.

        Software provides display and archiving functions. But a license key enables an open-end expansion. 32 interfaces output curves may be displayed at the same time. One USB sensor interface can be connected as standard. Each sensor can be tared individually, and measurement curves can be displayed jointly or separately in a graph. We can configure the interface to suit a specific sensor, although customer-specific parameters can be changed using the free analysis software supplied.

        The connection to LabVIEW or the integration into customers’ software is enabled by a free driver package.

      • Data Sheet & Downloads

        Data sheet
        Operation manual
        Software
        Further info
      • Accessories

        pdf 42_Pt100
        pdf 83-IMV
        pdf 9941_Z
      • Press information

        USB-Sensor-Interface für Multi-Channel-Anwendungen

        Mit dem neuen Multi-Sensor-USB-Interface Typ 9206 setzt burster konsequent im Bereich der Auswerteelektronik mit USB-Anbindung nach. Das Interface eignet sich für alle Anwendungen, bei denen Messsignale mehrerer Sensoren schnell und direkt ohne…

      • Application Examples

        Force measurements on charging sockets

        for e-mobility



      burster in Canada

      Physicom Corp.
      +1 4167543168
      salesphysicomcorp.com
      www.physicomcorp.com

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments

      Company-Information Company-Information

      Canada

      A-Tech Instruments Ltd.

      Toronto Office
      Physicom Corp.
      P.O. Box 252
      Scarborough, ON
      M1E 4R5
      Canada

      Fon: +1 4167547008
      Fax: +1 4167542351
      salesa-tech.ca
      www.a-tech.ca

      Montreal Office
      P.O. Box 447
      Pointe Claire, PQ
      H9R 4N9
      KANADA

      Fon: +1 5146955147
      Fax: +1 5146306136

      SERVICES

      • Qualified design, application support
      • Process optimization & rental equipment
      • Qualified commissioning, integration support & training
      • On-site trouble shooting & update service
      • Qualified phone & online support
      • Full repair facilities
      • Local calibration service

      Physicom Corp.

      P.O. Box 462
      Scarborough, ON
      M1E 4Y9
      Canada

      Fon: +1 4167543168
      Fax: +1 4167542351
      salesphysicomcorp.com
      www.physicomcorp.com

      Local sales support through different rep networks available, please inquire at Physicom.

      SERVICES

      • Qualified design, application support
      • Process optimization & rental equipment
      • Qualified commissioning, integration support & training
      • On-site trouble shooting & update service
      • Qualified phone & online support
      • Full repair facilities
      • Local calibration service

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments
      ×
      © 2022 // burster präzisionsmesstechnik gmbh & co kg
      nach oben