8532, 9186 Low cost measuring chain for simple load measurement with load cell and digital display

Extremely economical force indicator, compact sensor design, threaded holes for easy assembly, very good visual indication via 20 mm display, up to 2 limit values optionally possible, optionally as built-in or bench top housing

Product Inquiry

    Product comparison

      • Features

        • Measuring ranges from 0 ... 500 N to 0 ... 20 kN
        • Extremely economical force indicator
        • Compact sensor design
        • Threaded holes for easy assembly
        • Very good visual indication via 20 mm display
        • Up to 2 limit values optionally possible
        • Optionally as built-in or bench top housing
        • Measuring chain is trimmed and ready for immediate use
        • burster TEDS optionally available
      • Product data

        Model 8532, 9186
        Measuring range

        0 ... 500 N
        0 ... 20 kN

        Protection class

        Sensor
        IP60

        IN-LINE amplifier
        IP67

        Specific characteristics

        • Measuring ranges from 0 ... 500 N to 0 ... 20 kN
        • Extremely economical force indicator
        • Compact sensor design
        • Threaded holes for easy assembly
        • Very good visual indication via 20 mm display
        • Up to 2 limit values optionally possible
        • Optionally as built-in or bench top housing
        • Measuring chain is trimmed and ready for immediate use
        • burster TEDS optionally available
      • Description

        The force measuring chain has been developed for applications where the requirements for precision are not the primary focus, but rather where an economical purchase price and simple functionality are the key criteria. The sensor‘s strain gauge technology allows both static and dynamically changing forces to be measured. The large display means that the force acting on the sensor can be read easily. The four integrated threaded holes allow the sensor to be integrated quickly and easily into existing production and assembly equipment. 

        Typical applications include

        • Testing the strength of welded joints
        • Sports medicine
        • Monitoring the clamping force of hose connections

        The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor.

        A full-bridge strain gauge is used as the measuring element inside the sensor, by means of which the force to be measured is converted into a proportional electrical voltage. This is indicated as a force on the display.

        It has been possible to implement this extremely economical digital indicator through the use of the latest microprocessor technology. The simplicity of operation and adjustment need hardly be explained. The self-explanatory abbreviations allow even an inexperienced user to configure the device in a very short time.

      • Data Sheet & Downloads

        Data sheet
        Brochure
        Further info


      burster in USA

      burster Inc.
      Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
      adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
      www.burster.us

      Product category :

      • Torque Sensors
      • Load Cells
      • Displacement Sensors
      • Mechanical and Electrical Calibration Solutions

      Company-Information Company-Information

      Physicom Corp.
      +1 4167543168
      salesphysicomcorp.com
      www.physicomcorp.com

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments

      Company-Information Company-Information

      USA

      burster Inc.

      Adam Giorgione; Christina Giorgione
      105 Laurel Creek Rd. SE
      Suite: 10C Calhoun, GA. 30701

      Darren McCulley
      304 State Route 303
      44241 Streetsboro OH

      USA

      Fon: Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
      adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
      www.burster.us

      Product category :

      • Torque Sensors
      • Load Cells
      • Displacement Sensors
      • Mechanical and Electrical Calibration Solutions

      Physicom Corp.

      P.O. Box 462
      Scarborough, ON
      M1E 4Y9
      Kanada

      Fon: +1 4167543168
      Fax: +1 4167542351
      salesphysicomcorp.com
      www.physicomcorp.com

      Local sales support through different rep networks available, please inquire at Physicom.

      SERVICES

      • Qualified design, application support
      • Process optimization & rental equipment
      • Qualified commissioning, integration support & training
      • On-site trouble shooting & update service
      • Qualified phone & online support
      • Full repair facilities
      • Local calibration service

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments
      ×
      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben