Instrumentation Amplifier 9250 / Bus controller 9251 Outstanding system with up to 8 modules + bus controller

The future world of automation presents challenges such as networking, speed, accuracy, integration and cost effectiveness. 

  • Features

    • Ready to use with any make of sensor for your measurement needs, manufacturer independent
    • Ultra-fast pushbutton configuration
    • Automatic sensor recognition due to burster TEDS
    • Expandable fieldbus interface via the bus controller
    • Supports Ethernet based fieldbuses as PROFINET, EtherCAT, EtherNet/IP oder I/O interface
    • Synchronous export of up to 8 measurement channels via the bus controller
    • Full measurement-data export facility 
    • Suitable for force, pressure, displacement, rotational speed and torque measurements, including combined measurements
    • Tare facility via pushbutton or I/O signals for each 9250 amplifier
    • Up to two real-time signals/limit switches per amplifier module
    • Versatile configuration using DigiVision PC software via USB port
    • High measurement accuracy
    • Space-saving design for control-cabinet mounting
    • Adjustable cut-off frequencies
  • Product data

    Model 9250, 9251
    Measurement accuracy ±0.03 % F.S.
    Sample rate 14400 Meas./s.
    Type of sensor

    • Strain gage
    • Potentiometer
    • DC/DC
    • Incremental sensors
    Interfaces Screw terminal
    Sensor excitation

    Strain gage full bridge:

    • 2,5
    • 5
    • 10 V
    • configurable, short-circuit proof

    Potentiometer:

    • 5 V
    Protection class IP20
    Supply voltage

    • 11 ... 30 V DC
    • Galvanic separation
    • Overvoltage
    • Pole protection
    Specific characteristics

    • Ultra-fast pushbutton configuration
    • Non-linearity < 0,005 % F.S.
    • Outputs ±10 V, ±5V and 0 (4) - 20 mA
    • 6 wire technique 
    • Automatic sensor recognition due to burster TEDS
    • Adjustable cut-off frequencies
    • Versatile configuration using DigiVision PC software via USB port
  • Description

    The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters.

    The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets. A highly accurate precision amplifier performs the amplification of the sensor signal being applied. The latest microprocessor technology made a 24 bit AD conversion with high accuracy possible. The sensor excitation is performed by the amplifier module itself so that no additional voltage source is required. It can also be set in steps of 2.5 V, 5 V, 10 V using configuration software DigiVision. The maximum feed current of 40 mA permits parallel connection of several strain gages sensors, e.g. for the addition of measurement variables. Measurement errors brought about by varying line lengths or due to temperature fluctuations effecting the sensor cable are avoided by having probe lines measuring the actual feed voltage directly on site at the sensor itself (6 wire technology). The cut-off frequency of the amplifier can be switched between 10 Hz and 1 kHz

  • Data Sheet & Downloads

    Data sheet
    Operation manual
    Brochure
    Further info
    Software
  • Videos

    Taking the lead in instrumentation amps
    Outstanding system with up to 8 modules + bus controller.   

    Ultra-fast Configuration Instrumentation Amplifier 9250


    Youtube channel Burster Youtube Channel

Related products



burster in Canada

Physicom Corp.
+1 4167543168
salesphysicomcorp.com
www.physicomcorp.com

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments

Company-Information Company-Information

Canada

A-Tech Instruments Ltd.

Toronto Office
Physicom Corp.
P.O. Box 252
Scarborough, ON
M1E 4R5
Canada

Fon: +1 4167547008
Fax: +1 4167542351
salesa-tech.ca
www.a-tech.ca

Montreal Office
P.O. Box 447
Pointe Claire, PQ
H9R 4N9
KANADA

Fon: +1 5146955147
Fax: +1 5146306136

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Physicom Corp.

P.O. Box 462
Scarborough, ON
M1E 4Y9
Canada

Fon: +1 4167543168
Fax: +1 4167542351
salesphysicomcorp.com
www.physicomcorp.com

Local sales support through different rep networks available, please inquire at Physicom.

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments
×

Solutions

Lösungen Bild

Sectors

Automotive

Product Inquiry

    Product comparison

      Brandnew brochure: Load cells

      Discover our new brochure Load cells for production, automation, R&D and quality assurance with many application examples and product focused information!

      Download our new brochure

      © 2020 // burster präzisionsmesstechnik gmbh & co kg
      nach