8227 Pressure transmitter

• Features

  • Measurement ranges of 0 ... 0.05 bar to 0 ... 500 bar
  • Accuracy from 0.25 % F.S.
  • Built-in instrumentation amplifier with output 0 ... 10 V
  • Process connection thread G 1/4 inch
  • Protection class IP65/67

• Product data

  Model	8227
  Measuring range	0 … 0.05 bar 0 … 0.1 bar 0 … 0.25 bar 0 … 0.5 bar 0 … 1 bar 0 … 2 bar 0 … 5 bar 0 … 10 bar 0 … 20 bar 0 ... 30 bar 0 … 50 bar 0 … 100 bar 0 … 200 bar ​​​​​​​0 ... 350 bar 0 … 500 bar
  Kind of measurement	Against atmospheric pressure
  Signal output	0 … 10 V 0 … 5 V 4 … 20 mA
  Range of operating temperature	-40 ... +105 °C
  Burst pressure/ -protection	300 % over capacity
  Dead volume	0.5 cm3
  Specific characteristics	Measuring ranges between 0 ... 0.05 bar to 0 ... 500 bar and -1 ... 1 bar to -1 ... 10 bar Suitable for liquid and gaseous media For dynamic and static measurements Option: absolute measurement Very economic price

• Description

  With its rugged housing and a stainless steel sensor element, the transducer is particularly robust and ideally suited to the harshest environments. This also means that the sensor can be installed anywhere with no effect on the measurement signal. The built-in instrumentation amplifier converts the sensor signals into noise-immune voltage signals or current signals that can be transmitted over relatively long distances. For high viscose materials, a front-level membrane M12 x 1 is available, and with this disruptive dead volumes can be expelled.

  The sensor has a small protected hole on the rear to allow measurement of atmospheric pressure (measurement type relative). For the absolute measurement option, the applied pressure is measured with respect to an enclosed vacuum.

  As an electrical connection, a DIN 43650A valve connector or an M12 x 1, 4-pin connection is available.

• Data Sheet & Downloads

  Data sheet

  8227

  DEEN

Related products

9206

9180

SENSORMASTER 9163