8739 LVDT transducer with IN-LINE amplifier

Small sensor with a diameter of only 8 mm for installation into restricted structures, vibration-proof and wear resistant, internal IN-LINE amplifier, for direct measuring of displacement and indirect measuring of convertable mechanical values

Product Inquiry

    Product comparison

      • Features

        • Ranges from 0 … 1 mm to 0 ... 25 mm
        • Non-linearity 0.25 % F.S.
        • Sensor diameter 8 mm
        • Vibration and wear free
        • Output 0 ... 10 V
        • Optional output 0 ... 5 V, ± 5 V, 4 ... 20 mA
        • Sensor with or without IN-LINE amplifier
      • Product data

        Model 8739
        Principle Inductive
        Measuring range

        0 … 1 mm
        0 … 2 mm
        0 … 5 mm
        0 … 10 mm
        0 … 25 mm (without return spring)

        Signal output

        0 ... 10 V
        0 ... 5 V
        ±5 V
        4 ... 20 mA
        10 ... 0 V
        5 ... 0 V
        LVDT

        Protection class IP60
        Range of operating temperature -20 ... +80 °C
        Excitation voltage 13,5 ... 28 VDC
        Electrical connection

        Shielded PVC cable

        Return spring Yes
        Options

        None
        With threaded sleeve M12 x 1.75
        Tip not glued

        Specific characteristics

        • Sensor diameter 8 mm
        • Vibration and wear free
        • Sensor with or without IN-LINE amplifier
        • Optional protection class IP65
      • Description

        Inductive displacement sensors of this series measure linear displacements and indirectly all mechanical values convertible into displacements by additional equipment (i.e. tension and compression forces, extension, torque, vibration). The sensor body equipped with a connector has an outer diameter of only 8 mm and therefore is especially well suitable for the integration in dimensionally restricted structures.

        Typical application fields are displacement and extension measurements on

        • Machines
        • Servo systems
        • Motor vehicles
        • Test benches
        • Production plants

        The cylindrical case made of stainless steel, houses a differential transformer (LVDT). It consists of a primary and two secondary coils with axially moveable core. A displacement of this core changes the magnetic induction of the coils. The INLINE carrier frequency amplifier converts the displacement into a direct proportional electrical DC voltage.

        The transducer is constructed as a probe at which within the measuring range a spring pushes the probe tip towards the measuring object. Bellows protect the mechanical guidance of the probe tip against pollution and splash water.

        The IN-LINE amplifier is integrated in the connector cable and adjusted specifically to the sensor. Both components form a unit while they can be separated for mounting purposes (miniature plug connection at the transducer). The use of not harmonized components may lead to increased measurement errors. For the IN-LINE amplifier version the sensor body is galvanically isolated from the excitation and from the measuring signal.

        Lateral forces decrease the durability.

      • Data Sheet & Downloads

        Data sheet
        Operation manual
        Software
      • Accessories

        pdf 8739-Z003
        pdf 8739-Z004
        pdf 8739-Z005
      • Application Examples

        Roundness measurement

        on an electric motor

      Related products




      burster in USA

      burster Inc.
      Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
      adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
      www.burster.us

      Product category :

      • Torque Sensors
      • Load Cells
      • Displacement Sensors
      • Mechanical and Electrical Calibration Solutions

      Company-Information Company-Information

      Physicom Corp.
      +1 4167543168
      salesphysicomcorp.com
      www.physicomcorp.com

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments

      Company-Information Company-Information

      USA

      burster Inc.

      Adam Giorgione; Christina Giorgione
      105 Laurel Creek Rd. SE
      Suite: 10C Calhoun, GA. 30701

      Darren McCulley
      304 State Route 303
      44241 Streetsboro OH

      USA

      Fon: Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
      adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
      www.burster.us

      Product category :

      • Torque Sensors
      • Load Cells
      • Displacement Sensors
      • Mechanical and Electrical Calibration Solutions

      Physicom Corp.

      P.O. Box 462
      Scarborough, ON
      M1E 4Y9
      Kanada

      Fon: +1 4167543168
      Fax: +1 4167542351
      salesphysicomcorp.com
      www.physicomcorp.com

      Local sales support through different rep networks available, please inquire at Physicom.

      SERVICES

      • Qualified design, application support
      • Process optimization & rental equipment
      • Qualified commissioning, integration support & training
      • On-site trouble shooting & update service
      • Qualified phone & online support
      • Full repair facilities
      • Local calibration service

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments
      ×
      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben