RESISTOMAT® 2329 for fast resistance measurement in automated processes

Up to 50 measurements and evaluations per second, RS232 and PLC interface standard (IEEE488 and USB option), resolution up to 10 µΩ,  accuracy 0.03 % Rdg.

Product Inquiry

    Product comparison

      • Features

        • Measurement range from 200 mΩ ... 200 kΩ
        • Resolution up to 10 μΩ
        • Measurement accuracy 0.03 % Rdg.
        • Automatic measurement range selection
        • Up to 50 measurements and evaluations per second
        • Temperature compensation for all materials
        • Thermovoltage compensation
        • Dry-circuit measurement in accordance with DIN IEC 512
        • Data logger for 20 000 measurement values
        • RS232 and PLC interface standard (IEEE488, USB and Ethernet option)
      • Product data

        Model 2329
        Measuring range

        200.00 mΩ
        2.0000 Ω
        20.000 Ω
        200.00 Ω
        2.0000 kΩ
        20.000 kΩ
        200.00 kΩ

        Resolution

        10 μΩ
        100 μΩ
        1 mΩ
        10 mΩ
        100 mΩ
        1 Ω
        10 Ω

        Measurement accuracy ≤ 0.03 % rdg.
        Measurement display 20 000 counts
        Automatic temperature compensation Yes
        Comparator Yes
        Interfaces

        • RS232
        • PLC
        • IEEE488 (option)
        • USB (option)
        • Ethernet (option)
        Specific characteristics

        • Automatic measurement range selection
        • Up to 50 measurements and evaluations per second
        • Temperature compensation for all materials
        • Thermovoltage compensation
        • Dry-circuit measurement in accordance with DIN IEC 512
        • Data logger for 20 000 measurement values
      • Description

        The RESISTOMAT® model 2329 is particularly suitable for fast measurements of low resistances in automated processes. Up to 50 measurements per second can easily be performed. The device complies with the latest CE guidelines and is designed for laboratory use as well as heavy-duty industrial applications. 

        A 2-fold and 4-fold comparator with switching outputs has been included for classifi cation and selection; this feature is particularly useful for serial tests. 

        One special application involves the measurement of contact resistances (dry-circuit measurement); the load voltage in this case is limited to 20 mV in order to prevent fritting (DIN IEC 512). The RS232 (standard) and IEEE488, USB and Ethernet (option) computer interfaces allow the set-up of fully automatic testing stations. The PLC interface allows easy integration into your production process control.

        Typical applications are resistance and conductivity measurements on:

        • Fuses
        • Airbag triggers
        • Coils for the automobile industry and electrical engineering
        • Plug-in contacts and switches
        • Commutator welded joints
        • Meter samples in cable manufacture
        • Circuit-board conductors etc.

        The device operates on the basis of proven 4-wire technology which corrects any incoming line or contact resistances.
        The measurement lines are checked by an integrated cable rupture monitor. Needless to say, the functions include temperature compensation for various test substances such as copper, brass, tungsten etc. Temperatures are measured by a Pt 100 sensor or infrared sensor (pyrometer) with analog outputs or any temperature transmitter e.g. thermocouple.
        For measuring test objects with low inductances, a special measurement input protection was developed to prevent voltage peaks from damaging the device when test objects are disconnected.

        If objects need to be tested for several different parameters by an automatic measurement system, you can store up to 32 device settings such as measurement ranges, limiting values, temperature coeffi cients etc. These settings are called up via a bit pattern (5 bits). Naturally, all device settings can also be made via the RS232 (standard) or IEEE488, USB and Ethernet interfaces (option).

        The integrated data logger can be used during serial measurements to store up to 20 000 measurement values which can be divided into 32 individual blocks. A digital filter is available for preselecting the measurement values to be stored. The evaluation menu of the stochastic data logger displays the maximum, minimum and average values as well as the standard deviation.

      • Data Sheet & Downloads

        Data sheet
        Operation manual
        Software
        Further info
      • Accessories

        pdf 2316-Z002
        pdf 2316-Z003
        pdf 2328-Z001
        pdf 2329-K001
        pdf 2329-Z004
        pdf 2329-Z006
        pdf 2392_V001
      • Application Examples

        Measurement of meter samples

        in the cable industry

        Measuring pedal operating forces

        Load cell



      burster in USA

      burster Inc.
      Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
      adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
      www.burster.us

      Product category :

      • Torque Sensors
      • Load Cells
      • Displacement Sensors
      • Mechanical and Electrical Calibration Solutions

      Company-Information Company-Information

      Physicom Corp.
      +1 4167543168
      salesphysicomcorp.com
      www.physicomcorp.com

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments

      Company-Information Company-Information

      USA

      burster Inc.

      Adam Giorgione; Christina Giorgione
      105 Laurel Creek Rd. SE
      Suite: 10C Calhoun, GA. 30701

      Darren McCulley
      304 State Route 303
      44241 Streetsboro OH

      USA

      Fon: Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
      adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
      www.burster.us

      Product category :

      • Torque Sensors
      • Load Cells
      • Displacement Sensors
      • Mechanical and Electrical Calibration Solutions

      Physicom Corp.

      P.O. Box 462
      Scarborough, ON
      M1E 4Y9
      Kanada

      Fon: +1 4167543168
      Fax: +1 4167542351
      salesphysicomcorp.com
      www.physicomcorp.com

      Local sales support through different rep networks available, please inquire at Physicom.

      SERVICES

      • Qualified design, application support
      • Process optimization & rental equipment
      • Qualified commissioning, integration support & training
      • On-site trouble shooting & update service
      • Qualified phone & online support
      • Full repair facilities
      • Local calibration service

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments
      ×
      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben