DIGIPILOT 5510 Acknowledgement device for manual work optical and acoustical notification

Optional addition to DIGIFORCE® process controller.

Optical and acoustical notification of OK- and / or NOK-results, processor-controlled device, several operation modes selectable, internal indicator light, external locking, protection class IP65 at frontpanel, suitable as desktop and panel meter

  • Features

    • Variably adjustable optical and acoustical signalling of OK/NOK parts
    • Processor controlled device, up to 8 different operation modes selectable
    • OK/NOK lamp on the front side
    • External interlocking, operation and display
    • Robust housing for industrial environment front plate IP65
    • Usable on desktop or installed to panel meter
  • Product data

    Model 5510
    Supply voltage

    90 ... 264 Veff / 47 ... 63 Hz

    Protection class

    • Front panel: IP65
    • Housing: IP30
    Range of operating temperature +5 ... +40 °C
    Specific characteristics

    • Variably adjustable optical and acoustical signalling of OK/NOK parts
    • Processor controlled device, up to 8 different operation modes selectable
    • OK/NOK lamp on the front side
    • External interlocking, operation and display
    • Robust housing for industrial environment front plate IP65
    • Usable on desktop or installed to panel meter
  • Description

    On production floor, the need for optical as well as acoustical notification of OK and NOK parts can be found oftentimes next to the evaluation done by measuring and evaluating instrumentation. Especially for manual work places with a certain allowed time/work piece ratio the additional notification related to the product is wanted, sometimes also the control of the previously identified OK and NOK parts. This function is fulfilled by DIGIPILOT 5510.

    The control device regulates dependencies of work processes by necessary acknowledgement of OK- and/or NOK parts and informs the results visually via warning lamp and acoustically via buzzer. Moreover, the mechanical arrest of a press, storing area or part feeding can be effected until an unmistakable identification for the product is done.

    The dependencies of acknowledgement, alarm and arrest are determined by the different operation modes which can be changed only by the fitter himself. The 24 V supply voltage for supplying the inputs "OK-" and "NOK acknowledg ments" is available even without a connected PLC. The DIGIPILOT 5510 is designed for rough industrial environment. As a complete unit with different switching and notification possibilities the device is priced at good value compared to a collection of separate solutions.

    DIGIPILOT 5510 is optimized to collaborate with DIGIFORCE® 9310. The two devices are connected electrically 1:1 via the PLC interface of DIGIFORCE® 9310 and a 25 pin cable model 9900-K331. If DIGIFORCE® 9310 is controlled via PLC the connection must be done on the available second bushing on DIGIPILOT 5510. DIGIPILOT 5510 offers different operation modes that need to be activated by jumpers in the 15 pin Sub-min-D connector for both modes, active as well as passive, i.e. with or without acknowledgement.

    This acknowledgement can be effected via the warning lamp on the front side of the instrument or via an external button (normally open). At the beginning of a new measurement, the present evaluation is erased. In the operation mode "Confirmation and evaluation NOK" the red light stays switched-on, even at a new measurement start. It will switchoff only after acknowledging the "NOK" result by pushing the green button.

  • Data Sheet & Downloads

    Data sheet
    Operation manual
    Brochure
    Further info

Related products


burster in Canada

Physicom Corp.
+1 4167543168
salesphysicomcorp.com
www.physicomcorp.com

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments

Company-Information Company-Information

Canada

A-Tech Instruments Ltd.

Toronto Office
Physicom Corp.
P.O. Box 252
Scarborough, ON
M1E 4R5
Canada

Fon: +1 4167547008
Fax: +1 4167542351
salesa-tech.ca
www.a-tech.ca

Montreal Office
P.O. Box 447
Pointe Claire, PQ
H9R 4N9
KANADA

Fon: +1 5146955147
Fax: +1 5146306136

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Physicom Corp.

P.O. Box 462
Scarborough, ON
M1E 4Y9
Canada

Fon: +1 4167543168
Fax: +1 4167542351
salesphysicomcorp.com
www.physicomcorp.com

Local sales support through different rep networks available, please inquire at Physicom.

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments
×
© 2021 // burster präzisionsmesstechnik gmbh & co kg
nach