8527 High precision compression load cell

Very high linearity ≤ ±0.035 % F.S. standardized sensitivity 1.5 mV/V, protection class IP65, premium steel

  • Features

    • Measuring ranges from 0 ... 500 N to 0 ... 100 kN
    • Relative non-linearity: ≤ ±0.035 % F.S.
    • Highest precision and manufacturing quality
    • Static and dynamic measurements
    • Protection class IP65
    • Made of high quality stainless steel
    • With standardized output signal
    • WKS (Factory Calibration Certificate) or DKD/DAkkS (Deutsche Akkreditierungsstelle GmbH - German Accreditation Body) calibration optional
    • Simplest mounting
    • burster TEDS optionally available
  • Product data

    Model 8527
    Measuring range

    0 .. 500 N
    0 … 1 kN
    0 … 2 kN
    0 … 5 kN
    0 … 10 kN
    0 … 20 kN
    0 … 50 kN
    0 … 100 kN

    Direction of force Compression
    Standardization Yes
    Signal output 1.5 mV/V
    Protection class IP65
    Overload protection No
    Pull-plate No
    Load introduction button Yes
    Range of operating temperature -30 ... +80 °C
    Specific characteristics

    • Measuring ranges from 0 ... 500 N to 0 ... 100 kN
    • Very high linearity ≤ ±0.035 % F.S.
    • Highest precision and manufacturing quality
    • Static and dynamic measurements
    • Protection class IP65
    • Made of high quality stainless steel
    • With standardized output signal
    • WKS (Factory Calibration Certificate) or DKD/DAkkS (Deutsche Akkreditierungsstelle GmbH - German Accreditation Body) calibration optional
    • Simplest mounting
    • burster TEDS optionally available
  • Description

    The model 8527 high-precision compression load cell is the ideal load cell for reference measurement chains where highly precise measurement results are required. Its very high production quality and extremely low non-linearity of just 0.035 % F.S. make it a dependable choice for comparative measurements and calibration tasks.

    Designed for a dynamic stress of up to 100 % of the full scale value, the model 8527 load cell is also suitable for situations where a rapid signal change with high amplitude occurs and has to be measured.

     

    The model 8527 high-precision compression load cell has a domed load button on top, onto which the compressive load being measured is applied. Inside the load cell is an elastic membrane, on which strain gages generate a resistance change in the measuring bridge and an output signal proportional to the load. For the best possible measurement results, the force should be applied axially and centrically to the load button. The mounting surface should ideally be hardened (60 HRC) and should not bend under the applied load.

  • Data Sheet & Downloads

    Data sheet
    Brochure
    Further info
  • Videos

    Example showing load cell fitted under pre-load with extreme overload protection 


    Youtube channel Burster Youtube Channel




burster in Canada

Physicom Corp.
+1 4167543168
salesphysicomcorp.com
www.physicomcorp.com

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments

Company-Information Company-Information

Canada

A-Tech Instruments Ltd.

Toronto Office
Physicom Corp.
P.O. Box 252
Scarborough, ON
M1E 4R5
Canada

Fon: +1 4167547008
Fax: +1 4167542351
salesa-tech.ca
www.a-tech.ca

Montreal Office
P.O. Box 447
Pointe Claire, PQ
H9R 4N9
KANADA

Fon: +1 5146955147
Fax: +1 5146306136

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Physicom Corp.

P.O. Box 462
Scarborough, ON
M1E 4Y9
Canada

Fon: +1 4167543168
Fax: +1 4167542351
salesphysicomcorp.com
www.physicomcorp.com

Local sales support through different rep networks available, please inquire at Physicom.

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments
×

Solutions

Lösungen Bild

Sectors

Automotive
Machine Manufacturers
Others
Tool / Mold Construction

Product Inquiry

    Product comparison

      Brandnew brochure: Load cells

      Discover our new brochure Load cells for production, automation, R&D and quality assurance with many application examples and product focused information!

      Download our new brochure

      © 2020 // burster präzisionsmesstechnik gmbh & co kg
      nach