8413, 8414 Subminiature load cell

Very compact, very small dimensions, for small measurement ranges, high frequencies of resonance, stainless steel, overload protection

  • Features

    • Measuring ranges 0 ... 5 N to 0 ... 5 kN
    • Especially flat design from 3.3 mm
    • Relative non-linearity: ≤ ±0.25 % F.S.
    • Model 8414 with mechanical overload protection
    • Temperature compensation -55 °C ... 120 °C
    • Made of high quality stainless steel
    • High frequencies of resonance
    • burster TEDS optionally available
  • Product data

    Model 8413, 8414
    Measuring range

    8413
    0 … 5 N
    0 … 10 N
    0 … 20 N
    0 … 50 N
    0 … 100 N
    0 … 200 N
    0 … 500 N
    0 … 1000 N
    0 … 2000 N
    0 … 5000 N

    8414
    0 … 5 N
    0 … 10 N
    0 … 20 N
    0 … 50 N
    0 … 100 N

    Direction of force Compression
    Standardization Option
    Signal output

    8413
    1.5 mV/V
    2 mV/V
    15 mV/V
    depending on measuring range

    8414
    1 mV/V
    12 mV/V
    depending on measuring range

    Protection class IP54
    Overload protection

    8413
    No

    8414
    Yes

    Pull-plate No
    Load introduction button No
    Range of operating temperature -55 ... +120 °C
    Specific characteristics

    • Especially flat design from 3.3 mm
    • Made of high quality stainless steel
    • High frequencies of resonance
    • burster TEDS optionally available
  • Description

    This miniature force sensor was optimised with respect to its height and is, at only 3.4 mm, the lowest known sensor with strain gage technology. Hardly higher than the diameter of its connection cable, it can also be housed in conditions where space is limited. Along with its minimal geometry, the force sensor is also particularly light. It has a high resonance frequency to follow quickly changing load alternations. Despite its extreme miniaturisation, in its application it remains completely robust and suitable for industry, not only with regard to the highly flexible cable connections or the full welding of sensors for the measurement ranges ≥ 0 … 10 N.

    The miniature compression force sensors are flat, cylindrical discs with covered bottoms. The central load application button for taking on compression forces is an integrated part of the top, which is the sensor‘s membrane. On its bottom, the strain gages are fixed on the inside of the housing and interconnected with a full Wheatstone bridge. This passes on, for force applications, an output voltage which is directly proportional to the size of the measurement.

    The connection cable exits radially from the sensor housing and is additionally stabilised by a case for measurement ranges ≥ 0 … 10 N. The support area of the bottom of the sensor is annular, however arranged as a circular area for measurement range 0 … 5 N.

  • Data Sheet & Downloads

    Data sheet
    Brochure
    Operation manual
    Further info
  • Videos

    Example showing load cell fitted under pre-load with extreme overload protection


    Youtube channel Burster Youtube Channel




burster in Canada

Physicom Corp.
+1 4167543168
salesphysicomcorp.com
www.physicomcorp.com

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments

Company-Information Company-Information

Canada

A-Tech Instruments Ltd.

Toronto Office
Physicom Corp.
P.O. Box 252
Scarborough, ON
M1E 4R5
Canada

Fon: +1 4167547008
Fax: +1 4167542351
salesa-tech.ca
www.a-tech.ca

Montreal Office
P.O. Box 447
Pointe Claire, PQ
H9R 4N9
KANADA

Fon: +1 5146955147
Fax: +1 5146306136

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Physicom Corp.

P.O. Box 462
Scarborough, ON
M1E 4Y9
Canada

Fon: +1 4167543168
Fax: +1 4167542351
salesphysicomcorp.com
www.physicomcorp.com

Local sales support through different rep networks available, please inquire at Physicom.

SERVICES

  • Qualified design, application support
  • Process optimization & rental equipment
  • Qualified commissioning, integration support & training
  • On-site trouble shooting & update service
  • Qualified phone & online support
  • Full repair facilities
  • Local calibration service

Product category :

  • Press-Fit Control / DIGIFORCE®
  • Process Instruments
×

Solutions

Lösungen Bild

Sectors

Aerospace Industry
Automotive
Marine Industry
Utility Vehicles

Product Inquiry

    Product comparison

      Brandnew brochure: Load cells

      Discover our new brochure Load cells for production, automation, R&D and quality assurance with many application examples and product focused information!

      Download our new brochure

      © 2020 // burster präzisionsmesstechnik gmbh & co kg
      nach