8740, 8741 DC/DC displacement transducers

• Features

  • Measurement ranges 0 ... 1 mm to 0 ... 150 mm
  • Non-linearity ± 0.25 % F.S., optional to 0.1 % F.S.
  • Integrated measuring amplifier, output 0 ... 5 V
  • Optional 0 ... 10 V, 4 ... 20 mA
  • Potted electronics not susceptible to vibration or impact
  • Special versions on request (see options)

• Product data

  Model	8740, 8741
  Principle	Inductive
  Measuring range	8740 0 … 1 mm 0 … 2 mm 0 … 5 mm 0 … 10 mm 0 … 25 mm 0 … 50 mm 0 … 100 mm 0 … 150 mm 8741 0 … 1 mm 0 … 2 mm 0 … 5 mm 0 … 10 mm 0 … 25 mm 0 … 50 mm
  Signal output	0 ... 10 V 0 ... 5 V ±5 V 4 ... 20 mA 10 ... 0 V 5 ... 0 V
  Protection class	8740 IP64 8741 IP60
  Range of operating temperature	-20 ... +80 °C
  Excitation voltage	9 ... 28 VDC
  Electrical connection	8740 3 wire, screened PVC cable 2 m 8741 7 pins plug connection
  Return spring	8740 No 8741 Yes
  Specific characteristics	Optional non-linearity 0.1 % F.S. Integrated measuring amplifier, output 0 ... 5  Optional 0 ... 10 V, 4 ... 20 mA Potted electronics not susceptible to vibration or impact Special versions on request (see options) 8741 USB interface through 9206

• Description

  Inductive displacement sensors using the principle of the differential transformer (LVDT) can be used to measure displacement and, indirectly, magnitudes that can be converted into displacements such as force, pressure, strain, torque, vibration and so forth.

  Thanks to the high quality of their measurements, their high protection and long service life, these sensors are used in many technologies (industry, research, development, etc.).

  Applications include measuring, controlling, regulating and monitoring both slow and fast movements between machine parts, measurements of position and positional changes of components and structural foundations, servo regulators, valve and robot controllers, growth measurements and so on.

  Their design is robust - the internal coils and electronics are potted - as a result of which the sensors can easily withstand shock and vibration. This makes the sensors also suitable for mobile applications (e.g. in vehicles) and for test installations where they will be subject to many test cycles.

  These inductive displacement sensors with integrated electronics incorporate a differential transformer and a carrier frequency measuring amplifier, potted and protected by a stainless steel housing.

  The differential transformer consists of one primary winding and two secondary windings; these are arranged symmetrically on either side of the primary winding. The integrated electronics demodulates, filters and amplifies the AC voltage induced in the secondary windings. A rod-shaped core is able to move inside the differential transformer. As an output, the sensor delivers a DC voltage whose magnitude proportionally depends on the position of the moveable core inside the sensor.

  Model 8740 incorporates a freely moveable, non-sprung core with two sliding Teflon rings that center the core in the hole through the body of the sensor. At the end of the moving rod is an M2 thread that can be used to couple the core mechanically to the object being measured. Any lateral force acting on the rod should be avoided.

  The moveable rod of model 8741 is mounted on ball bearings. A spring holds the tip of the probe against the object being measured. This version is advantageous when it is difficult or entirely impractical to implement a mechanical coupling. Once again, lateral forces will shorten the service life. The measuring side of the sensor is protected against pollution and splash water by a bellows.

• Data Sheet & Downloads

  Data sheet

  8740_8741

  DEENPL

  Operation manual

  8740_8741

  DEEN

• Accessories

  8740-Z002

  DEEN
  8740-Z003

  DEEN
  8740-Z004

  DEEN

Related products

SENSORMASTER 9163