8718 Potentiometric displacement sensor

For precise and linear measurements in large measurement ranges, high resolution, compact, without rod

Product Inquiry

    Product comparison

      • Features

        • Measurement ranges from 0 ... 100 mm to 0 ... 2000 mm
        • Non-linearity up to 0.05 % F.S.
        • Compact design, without rod
        • Displacement speed up to 10 m/s
        • Service life: >108 movements
      • Product data

        Model 8718
        Principle Potentiometric
        Measuring range

        0 … 100 mm
        0 … 150 mm
        0 … 200 mm
        0 … 300 mm
        0 … 400 mm
        0 … 500 mm
        0 … 600 mm
        0 … 750 mm
        0 … 1000 mm
        0 … 1250 mm
        0 … 1500 mm
        0 … 1750 mm
        0 … 2000 mm

        Signal output Depending on excitation voltage
        Protection class IP40
        Range of operating temperature -30 ... +100 °C
        Supply voltage Max. 50 VDC
        Electrical connection 5 pins plug connection
        Return spring No
        Specific characteristics

        • Compact design, without rod
        • Displacement speed up to 10 m/s
        • Service life: >108 movements
      • Description

        The high resolution allows linear measurements to be accurately sized even in large measurement ranges. Conversion of rotatory and translational motion by spindles, wires or others is not necessary for direct displacement measurement.

        Areas of application are:

        • Hydraulic and pneumatic cylinders
        • Detection of positions on coordinate
        • inspection machines
        • Displacement of plungers, knee levers or extruders
        • Coil and de coil lengths
        • Strokes on chassis
        • Metering strokes

        Displacement sensors model 8718, using a resistance track made of conductive plastic material, are suitable for direct, accurate and absolute measurements of displacements and lengths.

        Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.

        The vibration-cushioned slider allows a clear signal output even by slight shocks or high operating speeds up to 10 m/s. Due to its simple design the sensor is largely protected against electrical interference fields (Al-housing), it keeps the measured value after a power failure and does not generate any electrical interference.

        A magnetically hold steel band covers the whole measurement device gap free. Any lateral forces are avoided by a ball joint coupling mounted to the sensor.

      • Data Sheet & Downloads

        Data sheet
        Further info

      Related products




      burster in USA

      burster Inc.
      Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
      adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
      www.burster.us

      Product category :

      • Torque Sensors
      • Load Cells
      • Displacement Sensors
      • Mechanical and Electrical Calibration Solutions

      Company-Information Company-Information

      Physicom Corp.
      +1 4167543168
      salesphysicomcorp.com
      www.physicomcorp.com

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments

      Company-Information Company-Information

      USA

      burster Inc.

      Adam Giorgione; Christina Giorgione
      105 Laurel Creek Rd. SE
      Suite: 10C Calhoun, GA. 30701

      Darren McCulley
      304 State Route 303
      44241 Streetsboro OH

      USA

      Fon: Adam Giorgione, Christina Giorgione: +1-706-331-0537; Darren McCulley: +1-440-214-5333
      adam.giorgioneburster.us; christina.giorgioneburster.us; darren.mcculleyburster.us; salesburster.us
      www.burster.us

      Product category :

      • Torque Sensors
      • Load Cells
      • Displacement Sensors
      • Mechanical and Electrical Calibration Solutions

      Physicom Corp.

      P.O. Box 462
      Scarborough, ON
      M1E 4Y9
      Kanada

      Fon: +1 4167543168
      Fax: +1 4167542351
      salesphysicomcorp.com
      www.physicomcorp.com

      Local sales support through different rep networks available, please inquire at Physicom.

      SERVICES

      • Qualified design, application support
      • Process optimization & rental equipment
      • Qualified commissioning, integration support & training
      • On-site trouble shooting & update service
      • Qualified phone & online support
      • Full repair facilities
      • Local calibration service

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments
      ×
      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben