DKD DKD Calibration

Calibration is carried out on the basis of generally recognized methods and using measurement equipment traceable to national standards.

ISO 17025 calibration or accredited calibration is a guarantee of the reliability of your measurement results and serves as the technical basis for measurement and test equipment inspection as part of quality assurance measures. 

Product Inquiry

    Product comparison

      • Product data

        Model DKD
        DC voltage

        Measuring range // smallest readable uncertainty // Comment

        • 10 μV ... 200 V // (5 + 0.2 V/U) * 10-6  // U = actual measurement value
        • 1 V // 2 * 10-6
        • 1.02 V // 2 * 10-6
        • 10 V // 2 * 10-6
        DC current

        Measuring range // smallest readable uncertainty

        • 1 μA ... 100 mA // 10 * 10-6
        • > 100 mA ... 1 A // 20 * 10-6
        • > 1 A ... 10 A // 50 * 10-6
        • > 10 A ... 500 A // 10 * 10-5
        • Above 30 A, only calibration of current sources, not of ammeters
        DC resistance

        Measuring range // smallest readable uncertainty

        • 0.1 mΩ ... < 1 mΩ // 50 * 10-6
        • 1 mΩ ... < 10 Ω // 10 * 10-6
        • 10 Ω ... 100 kΩ // 5 * 10-6
        • > 100 kΩ ... 1 MΩ // 10 * 10-5
        Force

        Measuring range: 50 N ... 500 N
        (for 10 N ... 1 MN with external partners)
        Measurement procedure: DIN EN 10002-3, ISO 376, DAkkS-DKD-R 3-3
        Smallest readable uncertainty: 2 * 10-4
        Comment: Compression force, 500-N-K-BNME

        Torque

        Measuring range: 5 mN*m ... 240 N*m
        (240 N*m ... 5 kN*m with external partners)

        Absolute pressure

        Measuring range: 0.0 ... 2 bar and 
        > 2 ... 35 bar
        (for 35 ... 1400 bar with external partners)
        Measurement procedure: DIN EN 837, DAkkS-DKD-R 6-1, EURAMET/cg 17/v.01
        Smallest readable uncertainty
        8 * 10-5 * ρabs; but not less than 14 μbar or 0.25 mbar

        Excess pressure

        Measuring range: 0.0 ... 1 bar,
        > 1 ... 34 bar,
        0.0 ... 200 bar,
        > 200 ... 1400 bar
        (for 1400 ... 5000 bar with external partners)
        Measurement procedure: DIN EN 837, DAkkS-DKD-R 6-1, EURAMET/cg 17/v.01
        Smallest readable uncertainty:
        8 * 10-5 * ρabs; but not less than 0.24 μbar, 
        8 * 10-5 * ρabs; but not less than 0.26 mbar, 
        1.2 * 10-4 * ρabs; but not less than 8 mbar,
        1.2 * 10-4 * ρabs; but not less than 50 mbar

      • Description

        The following services are included in calibrations performed by burster:

        1. Assessing whether your test and measuring equipment is suitable for calibration
        2. Performing a calibration
        3. Documenting the calibration with a DAkkS calibration certificate
        4. Labeling the calibration items in accordance with ISO 17025 or German DKD-5 requirements.

        If we find during our calibration-suitability check that an adjustment is needed, we perform this adjustment prior to calibration in close consultation with you.

      • Data Sheet & Downloads

        Further info
        Measurement technology know-how
      • FAQ

        1. Which products can burster calibrate?
          As part of the accreditation, burster can calibrate and adjust all burster products. Calibration and adjustment of all sensors is performed either in burster laboratory or at a partner facility.
          Additionally, burster can calibrate sensors and equipment from other manufacturers after coordinating technical details.
        2. How long does a calibration take?
          Typically, a standard calibration takes 1 to 2 weeks after the test items are received and pending technical questions are resolved.
        3. What does a calibration involve?
          Every product is subject to an assessment of suitability for calibration prior to its calibration. If we find out that adjustments are needed, we contact you and after you go-ahead, we make the necessary adjustments and then repeat the calibration. All calibrations are performed in accordance with internationally standardized methods.
        4. What quality standards are met by a DKD calibration?
          With a DKD calibration you can be confident of compliance with all the quality systems used in the automotive, aerospace, pharmaceutical, medical and defence industries, such as ISO 9001, ISO 16494, ISO 13485, ISO 10012.
        5. What is "suitability for calibration"?
          When you send burster a product for calibration, we check prior to the actual calibration, that your unit is working properly electrically.
        6. What is the difference between calibration and adjustment?
          Calibration establishes the measurement range and accuracy of your instrument or test equipment. If it is found during calibration, that the measurement ranges or accuracy can no longer meet the product specifications guaranteed by burster, then it may be possible to adjust a unit so that it complies again with the promised specification.

      burster in Canada

      Physicom Corp.
      +1 4167543168
      salesphysicomcorp.com
      www.physicomcorp.com

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments

      Company-Information Company-Information

      Canada

      A-Tech Instruments Ltd.

      Toronto Office
      Physicom Corp.
      P.O. Box 252
      Scarborough, ON
      M1E 4R5
      Canada

      Fon: +1 4167547008
      Fax: +1 4167542351
      salesa-tech.ca
      www.a-tech.ca

      Montreal Office
      P.O. Box 447
      Pointe Claire, PQ
      H9R 4N9
      KANADA

      Fon: +1 5146955147
      Fax: +1 5146306136

      SERVICES

      • Qualified design, application support
      • Process optimization & rental equipment
      • Qualified commissioning, integration support & training
      • On-site trouble shooting & update service
      • Qualified phone & online support
      • Full repair facilities
      • Local calibration service

      Physicom Corp.

      P.O. Box 462
      Scarborough, ON
      M1E 4Y9
      Canada

      Fon: +1 4167543168
      Fax: +1 4167542351
      salesphysicomcorp.com
      www.physicomcorp.com

      Local sales support through different rep networks available, please inquire at Physicom.

      SERVICES

      • Qualified design, application support
      • Process optimization & rental equipment
      • Qualified commissioning, integration support & training
      • On-site trouble shooting & update service
      • Qualified phone & online support
      • Full repair facilities
      • Local calibration service

      Product category :

      • Press-Fit Control / DIGIFORCE®
      • Process Instruments
      ×
      © 2021 // burster präzisionsmesstechnik gmbh & co kg
      nach oben