Electrical testing of stators

for electric motors

  • Measuring range 1 μΩ ... 200 kΩ
  • Accuracy ±0.03 % Rdg. ±3 counts
  • PLC control
  • Dual-comparator for OK/NOK evaluation of the device under test
  • Temperature-compensated measurement

TASK

During stator manufacture, the stator wire is crimped into the connecting pin after winding. Crimping can cause wire breakage or the crimping process may not be performed correctly, resulting in a higher resistance. The crimping process requires 100% testing.

SPECIFIC REQUIREMENT

  • Rapid OK/NOK evaluation of the stator
  • Simultaneous testing of two separate windings in the stator
  • High-speed testing of an inductive device

Solution

The RESISTOMAT® 2316 measures the resistance values using the contact pins pressed onto the stator connecting pins, thereby ensuring 100% testing.
The test equipment is controlled via the production plant PLC.

Go to product RESISTOMAT® 2316

Sectors

Downloads

Applications
burster in Germany

burster praezisionsmesstechnik gmbh & co kg
+49 7224645-0
infoburster.com
www.burster.com

Company-Information Company-Information

Germany

burster praezisionsmesstechnik gmbh & co kg

Talstr. 1-5
76593 Gernsbach
Germany

Fon: +49 7224645-0
Fax: +49 7224645-88
infoburster.com
www.burster.com

Trade fairs

Wire
15.04. - 19.04.24 - Düsseldorf, 40474, Germany  

The Battery Show
18.06. - 20.06.24 - Stuttgart, 70269, Deutschland  

×

Product Inquiry

    Product comparison

      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben