8227 Pressure transmitter

Robust, high-quality connector, very economic price, stainless steel, suitable for liquid and gaseous media

Product Inquiry

    Product comparison

      • Features

        • Measurement ranges of 0 ... 0.05 bar to 0 ... 500 bar
        • Accuracy from 0.25 % F.S.
        • Built-in instrumentation amplifier with output 0 ... 10 V
        • Process connection thread G 1/4 inch
        • Protection class IP65/67
      • Product data

        Model 8227
        Measuring range

        0 … 0.05 bar
        0 … 0.1 bar
        0 … 0.25 bar
        0 … 0.5 bar
        0 … 1 bar
        0 … 2 bar
        0 … 5 bar
        0 … 10 bar
        0 … 20 bar
        0 ... 30 bar
        0 … 50 bar
        0 … 100 bar
        0 … 200 bar
        ​​​​​​​0 ... 350 bar
        0 … 500 bar

        Kind of measurement Against atmospheric pressure
        Signal output

        0 … 10 V
        0 … 5 V
        4 … 20 mA

        Range of operating temperature -40 ... +105 °C
        Burst pressure/ -protection 300 % over capacity
        Dead volume

        0.5 cm3

        Specific characteristics

        • Measuring ranges between 0 ... 0.05 bar to 0 ... 500 bar and -1 ... 1 bar to -1 ... 10 bar
        • Suitable for liquid and gaseous media
        • For dynamic and static measurements
        • Option: absolute measurement
        • Very economic price
      • Description

        With its rugged housing and a stainless steel sensor element, the transducer is particularly robust and ideally suited to the harshest environments. This also means that the sensor can be installed anywhere with no effect on the measurement signal. The built-in instrumentation amplifier converts the sensor signals into noise-immune voltage signals or current signals that can be transmitted over relatively long distances. For high viscose materials, a front-level membrane M12 x 1 is available, and with this disruptive dead volumes can be expelled.

        The sensor has a small protected hole on the rear to allow measurement of atmospheric pressure (measurement type relative). For the absolute measurement option, the applied pressure is measured with respect to an enclosed vacuum.

        As an electrical connection, a DIN 43650A valve connector or an M12 x 1, 4-pin connection is available.

      • Data Sheet & Downloads

        Data sheet


      burster in Germany

      burster praezisionsmesstechnik gmbh & co kg
      +49 7224645-0
      infoburster.com
      www.burster.com

      Company-Information Company-Information

      Germany

      burster praezisionsmesstechnik gmbh & co kg

      Talstr. 1-5
      76593 Gernsbach
      Germany

      Fon: +49 7224645-0
      Fax: +49 7224645-88
      infoburster.com
      www.burster.com

      Trade fairs

      Wire
      15.04. - 19.04.24 - Düsseldorf, 40474, Germany  

      The Battery Show
      18.06. - 20.06.24 - Stuttgart, 70269, Deutschland  

      ×
      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben