Calibration is carried out on the basis of generally recognized methods and using measurement equipment traceable to national standards.
ISO 17025 calibration or accredited calibration is a guarantee of the reliability of your measurement results and serves as the technical basis for measurement and test equipment inspection as part of quality assurance measures.
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×Model | DKD |
DC voltage |
Measuring range // smallest readable uncertainty // Comment
|
DC current |
Measuring range // smallest readable uncertainty
|
DC resistance |
Measuring range // smallest readable uncertainty
|
Force |
Measuring range: 50 N ... 500 N |
Torque |
Measuring range: 5 mN*m ... 240 N*m |
Absolute pressure |
Measuring range: 0.0 ... 2 bar and |
Excess pressure |
Measuring range: 0.0 ... 1 bar, |
The following services are included in calibrations performed by burster:
If we find during our calibration-suitability check that an adjustment is needed, we perform this adjustment prior to calibration in close consultation with you.
Talstr. 1-5
76593 Gernsbach
Germany
Fon: +49 7224645-0
Fax: +49 7224645-88
infoburster.com
www.burster.com
The Battery Show
18.06. -
20.06.24 -
Stuttgart,
70269,
Deutschland
burster North America
Products Sales USA
burster Inc.
105 Laurel Creek Rd. SE
Suite: 10C Calhoun, GA. 30701, USA
Phone: +1-706-659-7472
salesburster.us
Products Sales USA
burster Inc.
304 State Route 303
44241 Streetsboro, Ohio, USA
Phone: +1-440-214-5333
salesburster.us
Sales Process Instruments USA
Physicom Corp
Scarborough, Ontario
Ontario M1E 4Y9, Canada
Phone: 416 7543168
Fax: 416 7542351
salesphysicomcorp.com
Sales Sensors & Process Instruments CANADA
A-Tech Instruments Ltd.
Scarborough, Ontario
Ontario M1E 4R5, Canada
Phone: 416 7547008
Fax: 416 7542351
salesa-tech.ca