Benefit from a compensation to match your amplifier or signal conditioning electronics with your sensor and read off the value of the actual physical dimension or meet your own specific measurement requirements.
When we perform a compensation, you will get a measurement system, which you can use immediately for your measurements purposes.
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×Model | ABG |
91ABG |
Compensation of a measurement chain consisting of a sensor and indicator model 91xx |
92ABG |
Compensation of a measurement chain consisting of a sensor and indicator model 92xx |
93ABG |
Compensation of a measurement chain consisting of a DIGIFORCE® and a sensor |
44ABG |
Compensation of a measurement chain or entering of sensor data into a device model 44xx |
72ABG |
Compensation of a measurement chain consisting of a sensor and indicator model 72xx |
Compensation of a sensor with a signal conditioner ensures that the output signal equals 0 V (or a value specified by the customer) with the no-load present and 10 V (or a value specified by the customer) at the rated load.
Alternatively, it is possible to compensate some amplifiers to output 0 ... 20 mA or 4 ... 20 mA.
Compensation is always performed between one particular sensor and one particular electronic unit or amplifier and is documented in an adjustment protocol.
Compensation is a purely electronic procedure without any mechanical load being applied.
We recommend performing a calibration after a compensation to benefit in full from the high precision of our products.
<link http: www.burster.com en calibration-instruments calibration-devices-for-mechanical-values p detail trans-cal-7281 _blank externen link in neuem>TRANS CAL 7281
<link http: www.burster.com en calibration-instruments calibration-devices-for-mechanical-values p detail _blank externen link in neuem>Strain gauge simulator 9405
<link http: www.burster.com en calibration-instruments precision-calibration-sources-for-test-bay-lab p detail digistantr-4462 _blank externen link in neuem>DIGISTANT® 4462
Talstr. 1-5
76593 Gernsbach
Germany
Fon: +49 7224645-0
Fax: +49 7224645-88
infoburster.com
www.burster.com
The Battery Show
18.06. -
20.06.24 -
Stuttgart,
70269,
Deutschland
burster North America
Products Sales USA
burster Inc.
105 Laurel Creek Rd. SE
Suite: 10C Calhoun, GA. 30701, USA
Phone: +1-706-659-7472
salesburster.us
Products Sales USA
burster Inc.
304 State Route 303
44241 Streetsboro, Ohio, USA
Phone: +1-440-214-5333
salesburster.us
Sales Process Instruments USA
Physicom Corp
Scarborough, Ontario
Ontario M1E 4Y9, Canada
Phone: 416 7543168
Fax: 416 7542351
salesphysicomcorp.com
Sales Sensors & Process Instruments CANADA
A-Tech Instruments Ltd.
Scarborough, Ontario
Ontario M1E 4R5, Canada
Phone: 416 7547008
Fax: 416 7542351
salesa-tech.ca