Temperature coefficient ≤ 10 ppm/K, long-term stability < 0.02 % over years
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×
Model | 1406, 1407 |
Resistance range |
1406 1407 |
Tolerance | from 0.02 % |
Temperature coefficient | ≤ 10 ppm/K |
Storage stability | < 0.02 % over years |
Power | 4 W / Decade |
Range of operating temperature | +5 ... +50 °C |
Interfaces | No |
Specific characteristics |
1406
1407
|
The range of application for the high-precision resistance decades models 1406 and 1407 stretches from reference standard for precision measurements up to simulation ot a host of measuring transducers.
They can be used for control in complicated equipments and systems, such as equivalent circuit in resistor networks. Another application is the use in switching circuits, as reproducible variable in laboratory and test assemblies. The decade resistors meet all the requirements of these differing functions as well as the resulting demands.
The high-precision resistance decades models 1406 and 1407 are designed to meet the highest demands with regard to precision, temperature and long-term consistency. Many years at experience, tried-and-tested technology and the use of fieldproven materials guarantee the high level of precision. The decade resistors consist of low-capacity and low inductance wire windings of MANGANIN®.
The low temperature coefficient of this material, the low error tolerance of the resistors and the long-term stability achieved through careful artificial ageing are the guarantee for reliable conformity with the technical specifications for these decade resistors.
A specially developed precision stepping switch with high quality contact material and optimal brush construction guarantee very good reproducibility. The contacts are self-cleaning and virtually free of thermoelectric power. All 7 decade resistor stages are contained in an attractive sheet steel casing. The casing acts as screen against electromagnetic and electrostatic interference. lt is conductively connected to the earth socket on the front panel. The decade resistor, designed for use on the work or laboratory bench, can also be installed in a 19"-rack using two angle brackets.
Talstr. 1-5
76593 Gernsbach
Germany
Fon: +49 7224645-0
Fax: +49 7224645-88
infoburster.com
www.burster.com
Wire
15.04. -
19.04.24 -
Düsseldorf,
40474,
Germany
The Battery Show
18.06. -
20.06.24 -
Stuttgart,
70269,
Deutschland
burster North America
Products Sales USA
burster Inc.
105 Laurel Creek Rd. SE
Suite: 10C Calhoun, GA. 30701, USA
Phone: +1-706-659-7472
salesburster.us
Products Sales USA
burster Inc.
304 State Route 303
44241 Streetsboro, Ohio, USA
Phone: +1-440-214-5333
salesburster.us
Sales Process Instruments USA
Physicom Corp
Scarborough, Ontario
Ontario M1E 4Y9, Canada
Phone: 416 7543168
Fax: 416 7542351
salesphysicomcorp.com
Sales Sensors & Process Instruments CANADA
A-Tech Instruments Ltd.
Scarborough, Ontario
Ontario M1E 4R5, Canada
Phone: 416 7547008
Fax: 416 7542351
salesa-tech.ca