for load cells, torque sensors and pressure sensors Series 9206
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×Model | 72-9206-REF |
Sample rate | 1200/s |
Type of sensor |
|
Interfaces | USB |
Indicator | Status LED |
Sensor excitation |
Strain gauge:
Potentiometer:
Transmitter and DC/DC:
|
Protection class | IP67 |
Supply voltage | 4 V … 6 V |
Measurement channels | 16 |
Reference measurement device | Yes |
Data logger | Yes |
Electronic sensor data sheet | No |
Connection type | 6-wire connection technology |
Specific characteristics |
|
The 9206 USB sensor interface series is ideally suited to Notebook-based mobile use for high-precision, traceable calibration jobs that must be performed on-site for equipment such as presses, torque measurement facilities and pressure control systems.
A factory calibration certificate or German-accredited DAkkS calibration certificate can optionally be provided for the USB interface plus relevant sensors, ensuring compliance even with the stringent traceability requirements of quality assurance standards. This provides a quick, cost-effective way of assessing your system with traceable documentation of measurement results.
The device is intended for industrial use in sectors such as quality assurance, on-site service and equipment monitoring.
Further areas and examples of use:
The USB sensor interface is powered from the connected PC via the USB port, and uses this power supply to generate the sensor excitation voltage. The initial settings and sensor settings are made by burster in-house and saved in the USB sensor interface. These can then be fine-tuned by the customer.
The DigiCal calibration software can display the measurement data in various forms and save it in a custom report file or Excel file. The software includes calibration-routine management for quick comparisons of existing measurement data plus rapid and reliable access to recurring calibration processes. In addition, a range of START/STOPP-triggers can be enabled.
burster can configure the interface to suit a specific sensor, although you can customize your own parameters using the basic software version supplied free of charge. The driver package, available free of charge, lets you integrate the device in LabVIEW or your own software.
Talstr. 1-5
76593 Gernsbach
Germany
Fon: +49 7224645-0
Fax: +49 7224645-88
infoburster.com
www.burster.com
The Battery Show
18.06. -
20.06.24 -
Stuttgart,
70269,
Deutschland
burster North America
Products Sales USA
burster Inc.
105 Laurel Creek Rd. SE
Suite: 10C Calhoun, GA. 30701, USA
Phone: +1-706-659-7472
salesburster.us
Products Sales USA
burster Inc.
304 State Route 303
44241 Streetsboro, Ohio, USA
Phone: +1-440-214-5333
salesburster.us
Sales Process Instruments USA
Physicom Corp
Scarborough, Ontario
Ontario M1E 4Y9, Canada
Phone: 416 7543168
Fax: 416 7542351
salesphysicomcorp.com
Sales Sensors & Process Instruments CANADA
A-Tech Instruments Ltd.
Scarborough, Ontario
Ontario M1E 4R5, Canada
Phone: 416 7547008
Fax: 416 7542351
salesa-tech.ca